|
|
|
Home
|
"Motor racing, mountain climbing and bull fighting are the only true sports. All the rest are children's games played by adults"
Ernest Hemingway
|
|
The unique competition car constructors partner
Having been a primary active partner to the main Racecar Constructors for more than 30 years, CRP offers a unique opportunity to the Motor Sport market: a support throughout the entire project, including the manufacturing process.
CRP has been instrumental in the success of many race winning F1, Moto GP, Rally Raid, ALMS and World Rally Championship teams.What makes this company different are the partnerships we have formed with the different teams.
CRP Technology therefore provides race car design and construction services to competition car constructors and motoracing teams.
|
|
Written by PressOffice
|
|
Thursday, 20 November 2008 |
The IV International Congress for Colour and Conservation promoted and organized by Cesmar 7 is held these days in Milan focusing on the theme pointed out in 2006: "The care of painted surfaces, materials and methods for consolidation, and scientific methods to evaluate their effectiveness".
CRP Technology takes part to this event as a speaker, illustrating its Reverse Engineering application in the research-study.
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Monday, 17 November 2008 |
CRP Technology is at the American event for aerospace " AeroTest America 2008" from 17th to 20th November in the state of Michigan. Exhibition and conferences to promote the aerospace sector and its related sectors. CRP Technology will be at the event with its American division and with its Director of Operation Eng. Stewart Davis, who will hold a lecture discussing the case-study "1:8 Scale Wind tunnel model of the external fairing of the European Tiltrotor"
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Friday, 14 November 2008 |
 CRP Technology took part to the third international conference „Supply on the wings“, which is held under the motto „Aerospace – The driver for the Industry“ is embedded in the theme park „Aerospace Composite World“.
Eng. Livia Cevolini illustrated last 13th November the case-study related to the Rapid Prototyping application in the aerospace sector: Windform GF and SLS Technology
The project is about the 1:8 Scale Wind tunnel model of the external fairing of the European TILTROTOR.
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Monday, 03 November 2008 |
 On 11th November CRP will be among the most important operators in the motorsport for the MIA conference at PMW
After the successful speech Eng. Livia Cevolini held at MotorsportExpotech during the conference “The Value of Motorsport” the Chief Executive of MIA invited her to participate as speaker at the conference scheduled at the Professional Motorsport Worldexpo in Cologne.
Taking into account the current economic scenario MIA has decided to talk about the new trend in motorsport by organizing a two-day conference on the 11th and 12th of November entitled Changes in Motorsport ‘A vision for the future in turbulent times, inviting to the event relevant representative of the sector.
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Wednesday, 22 October 2008 |
 Following the success of the 2007 TCT Rapid Product and Rapid Manufacturing Exhibition, CRP Technology and Amber Composites are happy to confirm their presence at the Conference & Exhibits Event, taking place at the Ricoh Arena, Coventry, UK, on 21st and 22nd October.
See the latest CRP technologies at booth F11
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Tuesday, 21 October 2008 |
|
Great interest for the conference about the value of motorsport.
During the conference about "The Value of Motorsport" held in Modena on 16th October at MotorsportExpotech, Eng. Livia Cevolini received very good comments on her lecture about the theme of cost reduction in racing sector.
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Thursday, 09 October 2008 |
 CRP Technology is pleased to announce its participation in the first edition of the international exhibition Motorsport ExpoTech from 16th to 17th October 2008 at Modena fair district, the city of the Italian motor valley.
The company will exhibit and will be the speaker of the following lectures: “Innovative Materials” on 16th October at 9.30 and “Rapid Manufacturing and Reverse Engineering” on 17 October at 4.00 pm that will be held during the fair focused on motor sport and racing vehicles. The Italian company will be at the show with the racing division CRP Racing.
CRP Technology @ Hall A - Booth C2
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Thursday, 18 September 2008 |
|
 The Italian Art of Correggio at Galleria Nazionale in Parma together with the Reverse Engineering by CRP
From 20th Sept. 2008 to 25th Jan. 2009 - Vernissage 19th Sept.
CRP Technology has worked together with the University of Parma for a project of Reverse Engineering titled: “Chiesa di S. Maria del Quartiere” in Parma, realization of a digital archive of data of metric morphology acquired with 3D technologies.
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Tuesday, 16 September 2008 |
|
 International Exibition and Conference in Berlin 23rd-24th September for the new trends of High-Tech Casting
CRP Technology conference at 5.00 p.m. 23rd September Session S4
Berlin will be the capital of High-Tech from 23rd to 24th September and once again the Italian company CRP Technology will have the honor to present at 5.00 p.m. on Tuesday, 23rd at Session S4 “ Specials for Motor Sports and Aviation” the new applications during Euro U-Rapid 2008: the International User’s Conference & Exhibition on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing.
The Eng. Franco Cevolini, chairman and technical director of the company, will present the latest high-tech RM innovation, obtained from research-study carried out by R&D department of CRP Technology and the new ULTRArapid Casting technology.
In fact, CRP is still the only one in the world that is able to deliver such high quality Rapid Casting parts. The same technology was then developed in order to allow exceptional reliability, fatigue resistance, lightness and high mechanical performance.
The company can now guarantee the delivery of a fully dense and free-shape casting within 2 WEEKS thanks to a new procedure, called ULTRArapid Casting developed by the CRP R&D Staff, starting from the CRP’s rapid casting process, shortening the procedures and improving the quality.
The topic of the lecture held by Eng. Cevolini is focused on the behaviour of a 2008 racing vehicle' structural component made by Aluminium ULTRArapid Casting.
|
|
Read more...
|
|
|
Written by PressOffice
|
|
Tuesday, 02 September 2008 |
 CRP Technology has been awarded for the high content level of the case study
CRP Technology has been awarded by the commission of Automotive Composites Conference for the Best Paper that the company will illustrate on September 18th.
Great pleasure for the Italian business for the case study entitled “Rapid Manufacturing and continued development of highly stressed fibre-reinforced plastic parts: Motorbike dash assembly made by Windform® XT and SLS technology.
The paper illustrates one of the latest high-tech RP and RM applications, made by Laser Sintering Technology and WINDFORM® materials, on a 125GP Honda racing motorbikes.
|
|
Read more...
|
|
| |
|
|
|
