|
CRP Technology Provides Motorsports Camshaft Cover for Ilmor 4 Stroke MotoGP Engine
“A camshaft cover is the structural part that supports the bearing of the camshaft (camshafts seats, the camshaft usually runs at more or less 9000 rpm), directly applied on the 4 stroke 800cc engine head. The average working temperature is 130 to 140 °C. Every material has a recommended temperature limit. Mechanical properties decrease when the working temperature increases. The recommended limit for Windform XT is 130/140 °C but in some cases 150 to 160 °C also can be reached. The limiting factor comes from the thermoplastic base that melts around 180 °C. At a track like Bahrain or Dubai, even if the ambient temperature is significantly higher than the average at other circuits, the working parameters of the engine (i.e. water and oil temperature) must remain under the limits imposed by the manufacturer.”
 click here to download the article 651.24 Kb
|
|
|
CRP Technology Race Ahead at EuroMold 2007
“The highly successful Italian company CRP Technology will be exhibiting at EuroMold 2007 once again along with its official UK distributor Amber Composites. CRP Technology is a unique organisation that not only supplies the innovative Windform® range of laser sintering materials but it also supports entire projects through to manufacturing utilising the company’s extensive experience of more than 30 years in CNC machining, rapid prototyping (RP) and rapid manufacturing (RM), casting technology, design optimisation and materials development. This holistic approach has ensured that CRP is considered as a critical partner for a wide range of successful racing teams around the world — from Formula 1 to Rally and American Le Mans.”
click here to download the article 496.91 Kb
|
|
|
Structural Parts Made by Laser Sintering
“Besides the numerous non-structural parts made by Windform XT that can be found in the Ilmor engine, the 2007 innovation project is a real turning point in the creation of racing engines. If the project is successful, the future of the engine and frame production will have the green light toward really new and interesting delivery times, costs and performances.
click here to download the article 109.26 Kb
|
|
|
CRP Windform FX
“CRP has released a new variant of its well know Windform material range, FX.
It is a new generation polyamide based material, in which mechanical and repeatable characteristics make it particularly suited for Rapid Prototyping. The white coloured substance has exceptional resistance and resilience to repeated bending and torsion loadings; excellent crash resistance; consistence and behaviour similar to polypropylene and ABS stamped parts.”
click here to download the article 214.29 Kb
|
|
|
Yeni Ultra Hizli Dokujm: Dogru Hizli Imalat Teknolojisi
“CRP Yuksek teknolojik dokumde yine oncu CRP min Ar-Ge departman sayesinde yuksek yogunlukln ve serbest boyutlu dokum teslim etmek artik iki haftada mumkum...”
click here to download the article 95.25 Kb
|
|
|
New ULTRARapid Casting: the TRUE RAPID MANUFACTURING Technology
“CRP (Modena, Italy) is a pioneer in hi-tech casting and thanks to their CRP R&D Department, it’s possible to deliver a full dense and free-shape casting within two WEEKS. The quality of the parts is incredibly close to a CNC machined part, but with the ISOTROPY BY COMPENSATION typical of casting structure. The advantages that this process has over other direct metal sintering technology available today include:
- Less dimensional limits (less volume limits)
- No quality limits or problems (N0 deformations, porosity, holes…)
- No shape limits, no supports, complete geometrical freedom, like only in selective laser sintering of PA powders
- Much lower cost
click here to download the article 81.63 Kb
|
|
New Polyamide-Based Material
“Windform™ FX is a new generation polyamide-based material, whose mechanical and repeatable characteristics make it particularly well-suited for Rapid Manufacturing applications. White coloured, Windform FX is characterized by: exceptional resistance and resilience to repeated bending and torsion solicitations, excellent crash resistance, consistence and behaviour similar to polypropylene and ABS stamped parts.”
click here to download the article 194.51 Kb
|
|
Motovelocità CIV 125: Moretti ancora con Team CRP-ADV
Riccardo Moretti ha firmato per la prossima stagione con ADV, l’agenzia di management che ha gestito in passato Arnaud Vincent, campione del mondo 2002 della 125 e tanti altri piloti di livello internazionale. ADV ha fatto un nuovo accordo con CRP Racing per la prossima stagione e quindi Ricky vestirà ancora i colori del Reparto Racing di CRP Technology, l’azienda fornitrice di alta tecnologia dei più famosi Team di Formula 1, Le Mans Series, WRC, Rally Raid, ecc.
click here to download the article 143.87 Kb
|
|
|
Materiale a base poliammidica di nuova generazione
CRP Technology propone un nuovo della famiglia Windform™: Windform™ FX, un materiale a base poliammidica di nuova generazione, le cui caratteristiche meccaniche e ripetibili lo rendono particolarmente adatto ad applicazioni di Rapid Manufacturing. Di colore bianco, Windform™ FX è caratterizzato da: eccezionale resistenza e resilienza alle ripetute sollecitazioni di piegatura e di torsione; eccellente resistenza all’urto; consistenza e comportamento simili ai pezzi stampati in polipropilene ed ABS. Windform™ FX consente di realizzare prototipi accurate, affidabili e durevoli; non necessita di trattamenti successivi ed è perfetto per applicazioni funzionali.”
click here to download the article 2.01 Mb
|
|
|
CRP Technology at Euromold
“ CRP Technology will demonstrate its ULTRArapid Casting which offers product in two weeks with geometry freedom, an isotropic structure, and no deformations or porosity.”
click here to download the article 1.19 Mb
|
|
Una nuova lega di alluminio
“Una grande novità per i settori del Motorsport e dell’Aerospaziale: CRP Technology ha lanciato un nuovo prodotto sul mercato, una Lega di Alluminio Aerospaziale di alta qualità denominata CRP 8601, la quale viene prodotta dalla metallurgia delle polveri. Una polvere speciale è infatti ottenuta con un processo di mescolamento ad alta energia che garantisce eccellenti proprietà meccaniche. L’industria legata alla Formula Uno fa largo utilizzo di Alluminio MMC (i.e. AMC 225xe) mentre i Super Allumini, e di conseguenza la nuova lega CRP 8601, sono particolarmente idonei per tutte le altre serie motoristiche e per il settore aerospaziale.”
click here to download the article 106.57 Kb
|
|
Uso diretto del prototipo rapido per componenti ad alte prestazioni
I prototipi cosiddetti «rapidi» si ottengono attraverso la tecnologia di sinterizzazione laser. In questo articolo l’applicazione dei materiali WINDFORM® per la realizzazione di componenti montati su una moto da corsa. Una moto della classe 250 cc sviluppata in meno di sei mesi con la collaborazione dello staff tecnico di CRP Technology ha preso parte al Campionato Mondiale MotoGP 2005 sotto il marchio Fantic Motor. È stato l’inizio di una grande sfida da parte dell’azienda di Modena che ha lavorato sullo sviluppo del motore e delle sue parti per la scorsa stagione 2006 sfruttando la tecnologia di prototipazione rapida e i materiali WINDFORM®.
click here to download the article 1.00 Mb
|
|
|
Tools for the job
“Learns how the development of a new material has helped An Italian team win a championship this year. If the first five years of the 21st century saw the progressive maturing of computer aided design (CAD) technology then the next five must surely be devoted to maximising the benefit that it can bring with computer aided manufacture (CAM)...”
click here to download the article 1.23 Mb
|
|
|
High-Quality aluminium castings in two weeks
“CRP is announcing that it can now produce fully dense castings in aluminium alloys in just two WEEKS. With part quality that is said to be very close CNC machined components, and material properties as would be expected of cast aluminium, CRP says it has achieved a “really-near-net-shape” technology with its ULTRArapid Casting technology.”
click here to download the article 146.10 Kb
|
|
|
ULTRArapid Casting used for racing motorbike engine
CRP Racing has applied the CRP ULTRArapid Casting to a 125cc engine motorbike engine to enable seven different drawings and casting to be tested and validated in only ten months.
CRP Racing has had just one goal during the last ten months: the Honda 2 strokes 125cc engine development. This engine is completely new, it has been designed, tested and manufactured by CRP Racing and CRP Technology Staff.”
click here to download the article 146.10 Kb
|
|
Football & Racing Meet in Italy
“A meeting took place on Wednesday 17th October between in CRP Technology’s Racing dept. and the Modena soccer players. The meeting was a between 2 totally different disciplines, but both have the same group mentality and competitive spirit. All the CRP Racing Team were present, together with the rider Riccardo Moretti, who were all fresh from the agonistic success achieved in the Honda RS 125 GP Trophy and the Italian Championship (CIV), the Modena F.C. soccer players Nicholas Frey and Yuri Tamburini and the World Champion 125cc and 250cc Luca Cadalora.”
click here to download the article 205.37 Kb
|
|
|
Windform FX, ornek ve Olay Incelemesi: Yaris Motorlarinda Diyaframli Valfi
“CRP teknoloji hizli prototipleme ve hizli imalat amaciyla lazer sinterleme teknolojisini kullanarak yeni çozumler ve malzemeler arastirma ve calisma konusunda surekli olarak aktif çalisiyor...”
click here to download the article 1.03 Mb
|
|
|
Windform ile Euromold’da
“CRP teknoloji birçok yaris kazanan takimin basarisinda katkisi olan bir sirket. CRP F1’ den Rally ve American Le Mans’a kadar imalat prosesini de içeren butun projelere destek veriyor...”
click here to download the article 567.33 Kb
|
|
|
CRP Pioneers Titanium Rapid Casting methods to meet motorsports needs
“Rapid Casting combines rapid prototyping, which is used to manufacture a disposable pattern, and investment casting technology. The pattern is made using SLS (selective laser sintering) prototyping systems. The pattern then undergoes wax infiltrations via immersion and capillarity to increase its strength. It’s then immersed in a ceramic bath. The lost pattern is removed via dewaxing with flash firing or in an autoclave. The ceramic shell is subsequently sintered, and the alloy is cast with inductor or voltaic arc.”
click here to download the article 269.81 Kb
|
|
|
Il pilota svizzero Tiziano Amicucci firma con ADV e correrà per CRP Racing
“L’agenzia ADV di Montecarlo, sempre pronta a scoprire nuovi talenti delle due ruote, ha ingaggiato per la prossima stagione il Rider svizzero Tiziano Amicucci...”
click here to download the article 107.37 Kb
|
|
|
New ULTRARapid Casting: the TRUE RAPID MANUFACTURING Technology
“CRP is again a pioneer in hi-tech casting. Today, thanks to CRP R&D Department, it’s possible to deliver a full dense and free-shape casting within 2 WEEKS!! But the other great news is that the quality of the parts is incredibly close to a CNC machined part, but with the ISOTROPY BY COMPENSATION typical of casting structure. We can really speak of “really near net shape” technology!
click here to download the article 292.36 Kb
|
|
|
Aluminium alloy suits motorsport
“ CRP Technology is introducing a new high-quality aerospace-grade Aluminium Alloy called CRP 8601, which is manufactured by a special powder metallurgy process using a high-energy mixing process which ensures excellent mechanical properties…”
click here to download the article 265.23 Kb
|
|
|
Taking advantage of faster rapid manufacturing technologies
“…At the international Conference, held at Loughborough University, UK, in July 2007, CRP Technology presented a case study “Turning point in the creation of racing engines: structural parts made by laser sintering…”
click here to download the article 850.81 Kb
|
|
CRP Technology introduces a new Reverse Engineering and Dimensional Inspection Service
“CRP Technology never stops researching and studying new innovative technologies for hi-tech mechanics and Rapid Prototyping/Rapid Manufacturing and is therefore proud to announce the introduction of a new service: a new Reverse Engineering and Dimensional Inspection Service. ....
|
|
Leggi tutto...
|
|
CRP Technology to be at Euro U-Rapid and Eurmold
“In December, there will be two important events for CRP Technology: Euro U-Rapid and Euromold, one after the other and both in Germany. The Euro-uRapid 2007, International User’s Conference & Exhibition on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing will take place in Frankfurt on December 3rd–4th. After Euro U-Rapid, from December 5-8, CRP Technology will attend the 14th edition of Euromold (World Fair for Moldmaking and Tooling, Design and Application Development) at Frankfurt in Germany.”
click here to download the article 103.45 Kb
|
|
CRP Technology met the RP&SLS world at the 3D Systems World Conference
“From September 24th to September 27th, the first 3D Systems Users’ World Conference was held at Rock Hill (South Carolina – USA). CRP Technology had the great opportunity to attend this inaugural World Conference with the aim to be a dynamic learning and sharing environment to expand SLS knowledge and see how other businesses and users benefit daily from the Rapid Prototyping & Manufacturing technology. Dr. Livia Cevolini, Marketing and Sales Director of CRP Technology, Italy, made her presentation on Tuesday afternoon (25th September), during the session named “CastForm Applications”. She has illustrated an “Historical overview of CRP state-of-the-art casting work with CastForm products: 1996-2007, 11 years of experience to create the CRP winning method”.
click here to download the article 161.77 Kb
|
|
|
Materiale a base poliammidica di nuova generazione
“CRP Technology propone un nuovo prodotto della famiglia Windform® : Windform FX® , un materiale a base poliammidica di nuova generazione, le cui caratteristiche meccaniche e ripetibili lo rendono particolarmente adatto ad applicazioni di Rapidi Manufacturing.”
click here to download the article 96.25 Kb
|
|
Fra progetto e produzione: Compositi a Matrice Metallica
“Vediamo, attraverso l’esperienza dell’azienda CRP Technology, come le caratteristiche dei nuovi materiali che si affacciano sull’orizzonte dell’ambiente manifatturiero si ripercuotono non solo sul ciclo di produzione, ma anche sugli utensili che in esso vengono impiegati.
L’articolo fa riferimento ai materiali compositi a matrice metallica che, per le loro caratteristiche strutturali, ...
|
|
Leggi tutto...
|
|
A Modena lo sport apre le porte ai giovani
“Mercoledì 17 ottobre a Modena, dalle ore 10 circa alle ore 12.30, presso il reparto Racing della CRP Technology, ci sarà un incontro tra discipline diverse ma che traggono origine dalla stessa mentalità di gruppo. Il Team CRP Racing ospiterà infatti alcuni giocatori del Team Modena Football Club e metterà a loro disposizione i tecnici ....
|
|
Leggi tutto...
|
|
|
Motovelocità CIV: CRP un 2008 con pensieri Mondiali
“Mercoledì 17 Racergp è stato invitato presso il reparto racing della CRP Technology per un incontro, ospiti dei quali oltre alla stampa di settore, alcuni giocatori del Modena GC, il team CRP racing e Luca Cadalora. Non potevamo farci sfuggire l’occasione e siamo andati…”
click here to download the article 275.83 Kb
|
|
Redazionali 2007 
